Disulfide bond formation in secreton component PulK provides a possible explanation for the role of DsbA in pullulanase secretion.

When expressed in Escherichia coli, the 15 Klebsiella oxytoca pul genes that encode the so-called Pul secreton or type II secretion machinery promote pullulanase secretion and the assembly of one of the secreton components, PulG, into pili. Besides these pul genes, efficient pullulanase secretion also requires the host dsbA gene, encoding a periplasmic disulfide oxidoreductase, independently of disulfide bond formation in pullulanase itself. Two secreton components, the secretin pilot protein PulS and the minor pseudopilin PulK, were each shown to posses an intramolecular disulfide bond whose formation was catalyzed by DsbA. PulS was apparently destabilized by the absence of its disulfide bond, whereas PulK stability was not dramatically affected either by a dsbA mutation or by the removal of one of its cysteines. The pullulanase secretion defect in a dsbA mutant was rectified by overproduction of PulK, indicating reduced disulfide bond formation in PulK as the major cause of the secretion defect under the conditions tested (in which PulS is probably present in considerable excess of requirements). PulG pilus formation was independent of DsbA, probably because PulK is not needed for piliation.

Expression of the endogenous type II secretion pathway in Escherichia coli leads to chitinase secretion.

Escherichia coli K-12, the most widely used laboratory bacterium, does not secrete proteins into the extracellular medium under standard growth conditions, despite possessing chromosomal genes encoding a putative type II secretion machinery (secreton). We show that in wild-type E.coli K-12, divergent transcription of the two operons in the main chromosomal gsp locus, encoding the majority of the secreton components, is silenced by the nucleoid-structuring protein H-NS. In mutants lacking H-NS, the secreton genes cloned on a moderate-copy-number plasmid are expressed and promote efficient secretion of the endogenous, co-regulated endochitinase ChiA. This is the first time that secretion of an endogenous extracellular protein has been demonstrated in E.coli K-12.

Pilus formation and protein secretion by the same machinery in Escherichia coli.

The secreton (type II secretion) and type IV pilus biogenesis branches of the general secretory pathway in Gram-negative bacteria share many features that suggest a common evolutionary origin. Five components of the secreton, the pseudopilins, are similar to subunits of type IV pili. Here, we report that when the 15 genes encoding the pullulanase secreton of Klebsiella oxytoca were expressed on a high copy number plasmid in Escherichia coli, one pseudopilin, PulG, was assembled into pilus-like bundles. Assembly of the 'secreton pilus' required most but not all of the secreton components that are essential for pullulanase secretion, including some with no known homologues in type IV piliation machineries. Two other pseudopilins, pullulanase and two outer membrane-associated secreton components were not associated with pili. Thus, PulG is probably the major component of the pilus. Expression of a type IV pilin gene, the E.coli K-12 gene ppdD, led to secreton-dependent incorporation of PpdD pilin into pili without diminishing pullulanase secretion. This is the first demonstration that pseudopilins can be assembled into pilus-like structures.

Domain structure of secretin PulD revealed by limited proteolysis and electron microscopy.

Secretins, a superfamily of multimeric outer membrane proteins, mediate the transport of large macromolecules across the outer membrane of Gram-negative bacteria. Limited proteolysis of secretin PulD from the Klebsiella oxytoca pullulanase secretion pathway showed that it consists of an N-terminal domain and a protease-resistant C-terminal domain that remains multimeric after proteolysis. The stable C-terminal domain starts just before the region in PulD that is highly conserved in the secretin superfamily and apparently lacks the region at the C-terminal end to which the secretin-specific pilot protein PulS binds. Electron microscopy showed that the stable fragment produced by proteolysis is composed of two stacked rings that encircle a central channel and that it lacks the peripheral radial spokes that are seen in the native complex. Moreover, the electron microscopic images suggest that the N-terminal domain folds back into the large cavity of the channel that is formed by the C-terminal domain of the native complex, thereby occluding the channel, consistent with previous electrophysiological studies showing that the channel is normally closed.

The ChiA (YheB) protein of Escherichia coli K-12 is an endochitinase whose gene is negatively controlled by the nucleoid-structuring protein H-NS.

The chromosome of Escherichia coli K-12 contains a putative gene, yheB (chiA), at centisome 74.7, whose product shows sequence similarity with chitinases of bacterial and viral origin. We cloned the chiA (yheB) gene and demonstrated that it codes for a 94.5 kDa periplasmic protein with endochitinase/lysozyme activity. Under standard laboratory growth conditions, chiA expression is very low, as shown by the Lac- phenotype of a chiA transcriptional fusion to a promoterless lacZ reporter. To identify factors that control chitinase gene expression, we generated random Tn10 insertions in the chromosome of the fusion-containing strain, selecting for a Lac+ phenotype. The majority of the mutations that caused a Lac+ phenotype mapped to the hns gene, encoding the nucleoid-structuring protein H-NS. Transcription of chiA in vivo is driven by a single sigma70 promoter and is derepressed in an hns mutant. Using a competitive gel retardation assay, we demonstrated that H-NS binds directly and with high affinity to the chiA promoter region. In addition to hns, other E. coli mutations causing defects in global regulatory proteins, such as fis, crp or stpA in combination with hns, increased chiA expression to different extents, as did decreasing the growth temperature from 37 degrees C to 30 degrees C. A possible physiological function of ChiA (YheB) endochitinase in E. coli K-12 is discussed.

Multiple interactions between pullulanase secreton components involved in stabilization and cytoplasmic membrane association of PulE.

We report attempts to analyze interactions between components of the pullulanase (Pul) secreton (type II secretion machinery) from Klebsiella oxytoca encoded by a multiple-copy-number plasmid in Escherichia coli. Three of the 15 Pul proteins (B, H, and N) were found to be dispensable for pullulanase secretion. The following evidence leads us to propose that PulE, PulL, and PulM form a subcomplex with which PulC and PulG interact. The integral cytoplasmic membrane protein PulL prevented proteolysis and/or aggregation of PulE and mediated its association with the cytoplasmic membrane. The cytoplasmic, N-terminal domain of PulL interacted directly with PulE, and both PulC and PulM were required to prevent proteolysis of PulL. PulM and PulL could be cross-linked as a heterodimer whose formation in a strain producing the secreton required PulG. However, PulL and PulM produced alone could also be cross-linked in a 52-kDa complex, indicating that the secreton exerts subtle effects on the interaction between PulE and PulL. Antibodies against PulM coimmunoprecipitated PulL, PulC, and PulE from detergent-solubilized cell extracts, confirming the existence of a complex containing these four proteins. Overproduction of PulG, which blocks secretion, drastically reduced the cellular levels of PulC, PulE, PulL, and PulM as well as PulD (secretin), which probably interacts with PulC. The Pul secreton components E, F, G, I, J, K, L, and M could all be replaced by the corresponding components of the Out secretons of Erwinia chrysanthemi and Erwinia carotovora, showing that they do not play a role in secretory protein recognition and secretion specificity.

PpdD type IV pilin of Escherichia coli K-12 can Be assembled into pili in Pseudomonas aeruginosa.

Escherichia coli K-12 possesses at least 16 chromosomal genes related to genes involved in the formation of type IV pili in other gram-negative bacteria. However, E. coli K-12 does not produce type IV pili when grown under standard laboratory conditions. The results of reverse transcription-PCR, operon fusion analysis, and immunoblotting demonstrated that several of the putative E. coli piliation genes are expressed at very low levels. Increasing the level of expression of the major pilin gene (ppdD) and the linked assembly genes hofB and hofC (homologues of the Pseudomonas aeruginosa type IV pilus assembly genes pilB and pilC) did not lead to pilus production. However, expression of the ppdD gene in P. aeruginosa led to assembly of PpdD into pili that were recognized by antibodies directed against the PpdD protein. Assembly of PpdD into pili in P. aeruginosa was dependent on the expression of the pilB and pilC genes and independent of expression of the P. aeruginosa pilin structural gene pilA.

Testing the '+2 rule' for lipoprotein sorting in the Escherichia coli cell envelope with a new genetic selection.

We report a novel strategy for selecting mutations that mislocalize lipoproteins within the Escherichia coli cell envelope and describe the mutants obtained. A strain carrying a deletion of the chromosomal malE gene, coding for the periplasmic maltose-binding protein (MalE), cannot use maltose unless a wild-type copy of malE is present in trans. Replacement of the natural signal peptide of preMalE by the signal peptide and the first four amino acids of a cytoplasmic membrane-anchored lipoprotein resulted in N-terminal fatty acylation of MalE (lipoMalE) and anchoring to the periplasmic face of the cytoplasmic membrane, where it could still function. When the aspartate at position +2 of this protein was replaced by a serine, lipoMalE was sorted to the outer membrane, where it could not function. Chemical mutagenesis followed by selection for maltose-using mutants resulted in the identification of two classes of mutations. The single class I mutant carried a plasmid-borne mutation that replaced the serine at position +2 by phenylalanine. Systematic substitutions of the amino acid at position +2 revealed that, besides phenylalanine, tryptophan, tyrosine, glycine and proline could all replace classical cytoplasmic membrane lipoprotein sorting signal (aspartate +2). Analysis of known and putative lipoproteins encoded by the E. coli K-12 genome indicated that these amino acids are rarely found at position +2. In the class II mutants, a chromosomal mutation caused small and variable amounts of lipoMalE to remain associated with the cytoplasmic membrane. Similar amounts of another, endogenous outer membrane lipoprotein, NlpD, were also present in the cytoplasmic membrane in these mutants, indicating a minor, general defect in the sorting of outer membrane lipoproteins. Four representative class II mutants analysed were shown not to carry mutations in the lolA or lolB genes, known to be involved in the sorting of lipoproteins to the outer membrane.

Genetic dissection of the outer membrane secretin PulD: are there distinct domains for multimerization and secretion specificity?

Linker and deletion mutagenesis and gene fusions were used to probe the possible domain structure of the dodecameric outer membrane secretin PulD from the pullulanase secretion pathway of Klebsiella oxytoca. Insertions of 24 amino acids close to or within strongly predicted and highly conserved amphipathic beta strands in the C-terminal half of the polypeptide (the beta domain) abolished sodium dodecyl sulfate (SDS)-resistant multimer formation that is characteristic of this protein, whereas insertions elsewhere generally had less dramatic effects on multimer formation. However, the beta domain alone did not form SDS-resistant multimers unless part of the N-terminal region of the protein (the N domain) was produced in trans. All of the insertions except one, close to the C terminus of the protein, abolished function. The N domain alone was highly unstable and did not form SDS-resistant multimers even when the beta domain was present in trans. We conclude that the beta domain is a major determinant of multimer stability and that the N domain contributes to multimer formation. The entire or part of the N domain of PulD could be replaced by the corresponding region of the OutD secretin from the pectate lyase secretion pathway of Erwinia chrysanthemi without abolishing pullulanase secretion. This suggests that the N domain of PulD is not involved in substrate recognition, contrary to the role proposed for the N domain of OutD, which binds specifically to pectate lyase secreted by E. chrysanthemi (V. E. Shevchik, J. Robert-Badouy, and G. Condemine, EMBO J. 16:3007-3016, 1997).

Secretin PulD: association with pilot PulS, structure, and ion-conducting channel formation.

The outer membrane protein PulD (secretin) of Klebsiella oxytoca is required for transport of pullulanase across this membrane. We have purified a multimeric PulD complex from an Escherichia coli strain expressing all the proteins involved in pullulanase secretion. The outer membrane-anchored lipoprotein PulS was found to copurify with PulD. The molar ratio of the two proteins is close to 1:1, and the size of the complex is approximately 1 MDa. Scanning transmission electron and cryo-electron microscopy analyses showed that the purified complex is a cylindrical structure having a central cavity of approximately 7.6 nm and peripheral radial spokes. Fusion of proteoliposomes containing the purified complex with a planar lipid bilayer resulted in the appearance of small, voltage-activated, ion-conducting channels. We conclude that the central cavity seen in the electron microscope is part of a large gated channel and propose that the observed current fluctuations correspond to voltage-induced, relatively minor displacements of domains in the purified complex rather than to a complete opening of the secretin channel.

Membrane association and multimerization of secreton component pulC.

The PulC component of the Klebsiella oxytoca pullulanase secretion machinery (the secreton) was found by subcellular fractionation to be associated with both the cytoplasmic (inner) and outer membranes. Association with the outer membrane was independent of other secreton components, including the outer membrane protein PulD (secretin). The association of PulC with the inner membrane is mediated by the signal anchor sequence located close to its N terminus. These results suggest that PulC forms a bridge between the two membranes that is disrupted when bacteria are broken open for fractionation. Neither the signal anchor sequence nor the cytoplasmic N-terminal region that precedes it was found to be required for PulC function, indicating that PulC does not undergo sequence-specific interactions with other cytoplasmic membrane proteins. Cross-linking of whole cells resulted in the formation of a ca. 110-kDa band that reacted with PulC-specific serum and whose detection depended on the presence of PulD. However, antibodies against PulD failed to react with this band, suggesting that it could be a homo-PulC trimer whose formation requires PulD. The data are discussed in terms of the possible role of PulC in energy transduction for exoprotein secretion.

Protein secretion in Escherichia coli K-12: dead or alive?

Escherichia coli K-12 possesses a large number of chromosomal genes that, in other Gram-negative bacteria, are involved either in exoprotein secretion or in the formation of type IV pili. Some of these E. coli genes have been shown to encode proteins when expressed from heterologous promoters. Furthermore, at least two of these proteins are functional in heterologous complementation tests, but none of the genes examined so far is expressed when E. coli is grown under standard laboratory conditions. We propose that transcription of these genes is turned off during growth in laboratory medium, that their expression is controlled by environmental sensor proteins and that they could play an important role in pathogenicity or in the utilization of large polymers.

A second prepilin peptidase gene in Escherichia coli K-12.

Escherichia coli K-12 strains grown at 37 degrees C or 42 degrees C, but not at 30 degrees C, process the precursors of the Neisseria gonorrhoeae type IV pilin PilE and the Klebsiella oxytoca type IV pseudopilin PulG in a manner reminiscent of the prepilin peptidase-dependent processing of these proteins that occurs in these bacteria. Processing of prePulG in Escherichia coli requires a glycine at position -1, as does processing by the cognate prepilin peptidase (PulO), and is unaffected by mutations that inactivate several non-specific proteases. These data suggested that E. coli K-12 has a functional prepilin peptidase, despite the fact that it does not itself appear to express either type IV pilin or pseudopilin genes under the conditions that allow prePilE and prePulG processing. The E. coli K-12 genome contains two genes encoding proteins with significant sequence similarity to prepilin peptidases: gspO at minute 74.5 and pppA (f310c) at minute 67 on the genetic map. We have previously obtained evidence that gspO encodes an active enzyme but is not transcribed. pppA was cloned and shown to code for a functional prepilin peptidase capable of processing typical prepilin peptidase substrates. Inactivation of pppA eliminated the endogenous, thermoinducible prepilin peptidase activity. PppA was able to replace PulO prepilin peptidase in a pullulanase secretion system reconstituted in E. coli when expressed from high-copy-number plasmids but not when present in a single chromosomal copy. The analysis of pppA-lacZ fusions indicated that pppA expression was very low and regulated by the growth temperature at the level of translation, in agreement with the observed temperature dependence of PppA activity. Polymerase chain reaction and Southern hybridization analyses revealed the presence of the pppA gene in 12 out of 15 E. coli isolates.

The requirement for DsbA in pullulanase secretion is independent of disulphide bond formation in the enzyme.

Results from previous studies have suggested that an intramolecular disulphide bond in the exoprotein pullulanase is needed for its recognition and transport across the outer membrane. This interpretation of the data is shown here to be incorrect: pullulanase devoid of all potential disulphide bonds is secreted with apparently the same efficiency as the wild-type protein. Furthermore, the periplasmic disulphide bond, oxidoreductase DsbA, previously shown to catalyse the formation of a disulphide bond in pullulanase and to decrease its transit time in the periplasm, is shown here to be required for the rapid secretion of pullulanase devoid of disulphide bonds. Several possible explanations for the role of DsbA in pullulanase secretion are discussed.

Recent progress and future directions in studies of the main terminal branch of the general secretory pathway in Gram-negative bacteria--a review.

The main terminal branch (MTB) of the general secretory pathway is used by a wide variety of Gram- bacteria to transport exoproteins from the periplasm to the outside milieu. Recent work has led to the identification of the function of two of its 14 (or more) components: an enzyme with type-IV prepilin peptidase activity and a chaperone-like protein required for the insertion of another of the MTB components into the outer membrane. Despite these important discoveries, little tangible progress has been made towards identifying MTB components that determine secretion specificity (presumably by binding to cognate exoproteins) or which form the putative channel through which exoproteins are transported across the outer membrane. However, the idea that the single integral outer membrane component of the MTB could line the wall of this channel, and the intriguing possibility that other components of the MTB form a rudimentary type-IV pilus-like structure that might span the periplasm both deserve more careful examination. Although Escherichia coli K-12 does not normally secrete exoproteins, its chromosome contains an apparently complete set of genes coding for MTB components. At least two of these genes code for functional proteins, but the operon in which twelve of the genes are located does not appear to be expressed. We are currently searching for conditions which allow these genes to be expressed with the eventual aim of identifying the protein(s) that E. coli K-12 can secrete.

The conserved tetracysteine motif in the general secretory pathway component PulE is required for efficient pullulanase secretion.

The PulE component of the pullulanase secretion pathway, a typical main terminal branch of the general secretory pathway, has a tetracysteine motif (4Cys) that is also present in almost all of the many PulE homologues, including those involved in type-IV piliation and conjugal DNA transfer. The 4Cys resembles a zinc-binding motif found in other proteins such as adenylate kinases, which may be pertinent in view of the fact that PulE has a consensus ATP-binding motif and since at least one PulE homologue has been reported to have kinase activity. In PulE, the Cys residues of this motif form scrambled intra- and intermolecular disulfide bonds when cells are disrupted. Replacement of one or more Cys of this motif by Ser reduces PulE function, but at least two adjacent Cys must be replaced to prevent intramolecular disulfide bond formation.

Energy requirement for pullulanase secretion by the main terminal branch of the general secretory pathway.

The energy requirement for the second step in pullulanase secretion by the general secretory pathway was studied in Escherichia coli. In order to uncouple the two steps in the secretion pathway (across the cytoplasmic and outer membranes, respectively) and to facilitate kinetic analysis of secretion, a variant form of pullulanase lacking its N-terminal fatty acid membrane anchor was used. The transport of the periplasmic secretion intermediate form of this protein across the outer membrane was not inhibited by concentrations of sodium arsenate in excess of those required to reduce ATP levels to < or = 10% of their normal value. Pullulanase secretion was inhibited by the protonophore carbonyl cyanide m-chlorophenyl hydrazone at concentrations which were similar to those reported by others to be required to prevent solute uptake or the export and processing of preproteins across the cytoplasmic membrane, but which were in excess of those required to fully dissipate the proton-motive force and to reduce lactose uptake to a significant extent.

The C-terminal domain of the secretin PulD contains the binding site for its cognate chaperone, PulS, and confers PulS dependence on pIVf1 function.

Related outer membrane proteins, termed secretins, participate in the secretion of macromolecules across the outer membrane of many Gram-negative bacteria. In the pullulanase-secretion system, PulS, an outer membrane-associated lipoprotein, is required both for the integrity and the proper outer membrane localization of the PulD secretin. Here we show that the PulS-binding site is located within the C-terminal 65 residues of PulD. Addition of this domain to the filamentous phage secretin, pIV, or to the unrelated maltose-binding protein rendered both proteins dependent on PulS for stability. A chimeric protein composed of bacteriophage f1 pIV and the C-terminal domain of PuID required properly localized PulS to support phage assembly. An in vivo complex formed between the pIV-PulD65 chimera and PulS was detected by co-immunoprecipitation and by affinity chromatography.

Pullulanase: model protein substrate for the general secretory pathway of gram-negative bacteria.

Pullulanase of Klebsiella oxytoca is one of a wide variety of extracellular proteins that are secreted by Gram-negative bacteria by the complex main terminal branch (MTB) of the general secretory pathway. The roles of some of the 14 components of the MTB are now becoming clear. In this review it is proposed that most of these proteins form a complex, the secretion, that spans the cell envelope to control the opening and closing of channel in the outer membrane. Progress toward the goal of testing this model is reviewed.